Do I need mold remediation after water damage?
Not always. You likely need a professional when the mold covers more than about 10 square feet. The same goes for mold hidden in walls or ceilings, and mold after sewage or floodwater.
The EPA says most people can clean a moldy area under about 10 square feet themselves. The Washington State Department of Health (DOH) puts the line at 3 feet by 3 feet. DOH also suggests a professional when the mold affects the building's structure, when it's hidden, or when sewage caused it.
Water damage that was dried fast often never grows mold at all. The EPA says to dry water-damaged areas and items within 24 to 48 hours to prevent mold growth. If the wet area was dried in that window, you may only need moisture readings to confirm it's dry. For how fast mold grows and what's safe to do yourself, see mold after water damage.
Get help sooner if anyone in the home has asthma, allergies, a weak immune system or lung disease. The CDC says those people can react more strongly to mold.
What mold remediation involves, step by step
Professional mold remediation follows a set order. The industry standard for it is IICRC S520, now in its fourth edition (2024). Here is what a remediation crew should do, and what to ask about each step.
- Find and fix the moisture. Mold needs water. The crew should find the leak, condensation or wet crawl space behind the growth. A plumber or roofer may need to fix the source first.
- Set up containment. Containment is plastic sheeting that seals the work area from the rest of the house. The EPA recommends limited containment for 10 to 100 square feet of mold and full containment above 100 square feet.
- Put the area under negative pressure. A fan pulls air out of the sealed area, so dust and spores don't drift into other rooms. The EPA says containment should always be kept under negative pressure.
- Run a HEPA air scrubber. A HEPA air scrubber is a machine with a very fine filter that pulls spores and dust out of the air while work goes on.
- Remove moldy porous materials. Drywall, insulation, carpet and ceiling tiles with mold growing in them usually come out. They're bagged in plastic inside the containment before they're carried out (EPA).
- Clean what stays. Studs, joists and other solid wood are cleaned of mold, often by scrubbing, sanding or HEPA vacuuming. The EPA says killing mold isn't enough. It must be removed, because dead mold can still cause allergic reactions.
- Dry and check. The area is dried and checked with a moisture meter before anything is rebuilt. Some owners pay an independent inspector to check the work at this point.
Ask for the scope in writing before work starts. It should say what will be removed, how containment will be set up and how the company will show the job is done. Mold remediation time depends on how much has to come out and how long drying takes, so ask the company for its estimate.
Found mold behind a wall or under flooring? Call (360) 555-0123 to be connected with a local restoration company. Ask whether it handles mold or will tell you who does.
Mold testing or mold remediation: which do you need?
If you can see or smell mold, you usually don't need a mold test. You need the mold removed and the moisture fixed. The EPA says sampling is usually unnecessary when mold is visible. The CDC goes further and doesn't recommend mold testing at all.

There's a reason for this. No federal limits exist for mold or mold spores (EPA). There are also no set standards for what amount of mold in a home is acceptable (CDC). The color or type of mold doesn't change the fix either. WA DOH says to remove all indoor mold, whatever color it is.
A mold test can still help in a few cases:
- You smell a musty odor but can't find the source, and you suspect hidden mold.
- Someone in the home has a health condition, and a doctor wants more information.
- A landlord, tenant, buyer or insurer wants an independent record.
- You want proof that a finished remediation job worked.
Use an independent mold inspector. If you test, hire someone who doesn't also sell the cleanup. An industrial hygienist or other indoor air professional works for you and has no stake in how big the job is. WA DOH points people to the American Industrial Hygiene Association (AIHA) for finding one. DOH also advises asking mold professionals to look for visible mold and dampness, not spore counts.
Washington has no mold license: how to check a company
Washington has no state mold license. The Washington State Department of Health says there are no specific certification requirements for mold or water damage restoration in the state. DOH adds that anyone can call themselves a "mold remediation specialist."
That means you have to check the company yourself. Here's what you can verify:
- WA L&I registration. Contractors doing construction work in Washington must register with Labor & Industries. Look the company up on L&I Verify before work starts. DOH also advises checking for recent infractions and making sure the contractor is bonded and insured.
- IICRC S520. Ask whether the company follows the IICRC S520 standard for professional mold remediation. DOH suggests looking for a professional who follows a recognized standard.
- AMRT certification. AMRT stands for Applied Microbial Remediation Technician. It's an IICRC course and certification for people doing mold and sewage remediation. Ask which crew members hold it, and check the firm in the IICRC Global Locator.
A company that says it's "licensed for mold" in Washington is describing a license that doesn't exist. Ask what it actually holds.
What mold remediation costs
National figures put most mold remediation jobs at about $1,222 to $3,751, with an average of about $2,365 (Angi, 2025 national data). Angi also lists a typical $10 to $25 per square foot. We found no reliable Bellingham average, so these are national numbers.
The price goes up with:
- Size. More square feet means more containment, more removal and more disposal.
- Where the mold is. Attics, crawl spaces and wall cavities take more time to reach than an open basement wall.
- What has to come out. Drywall and insulation removal adds labor, disposal and later rebuild cost.
- Testing. An independent inspection before or after the work is a separate bill.
Insurance may cover only part of it. Many Washington policies limit mold coverage, and it usually applies only when the mold came from a covered loss, like a sudden pipe burst. See does insurance cover water damage in Washington and water damage restoration cost.
Older homes: check for asbestos before walls come out
Bellingham has many older homes. About 43% of homes in the city were built before 1980 (US Census, ACS 2020–2024). Drywall texture, joint compound, popcorn ceilings and old flooring in homes that age can contain asbestos.
The Northwest Clean Air Agency (NWCAA) says remodeling or demolition projects in Whatcom County must check whether asbestos is present before starting. Rentals and multifamily buildings must use a state-certified asbestos abatement contractor. Ask the remediation company how it handles asbestos testing before it cuts out moldy drywall. See Bellingham water damage permits for the rules.
How to spot scare tactics from a mold company
A fair mold company shows you the moisture readings and the growth, then explains its plan. A company using scare tactics leans on fear instead of evidence.
Watch for these signs:
- "Toxic" talk about the color. WA DOH says the color doesn't matter. All indoor mold gets removed the same way.
- Pressure to sign today. Small, dry patches are rarely an emergency. Ask for a written scope and take time to compare.
- The same company tests and removes. That is a conflict of interest. Use an independent inspector if you test.
- Whole-house treatment for a small spot. Fogging or spraying every room doesn't fix a leak under one sink.
- A "mold-free guarantee." No company can promise mold will never return if the moisture problem comes back.
It's fine to get a second opinion. Ask the second company for moisture readings and photos, too.
Who does the work when you call
Bellingham Water Damage is a referral service run by Mateo. When you call, you're connected to a local water damage restoration company that serves Bellingham and Whatcom County. That company does the work, and we may receive a referral fee.
Not every water damage company does mold remediation. Ask on the call whether this company does, and whether it follows IICRC S520. Check the company on L&I Verify before work starts, and ask for a written estimate before non-emergency work. See about this site.
Common questions
Does bleach kill mold on drywall and wood?
Bleach is not a good fix for moldy drywall or wood. The EPA doesn't recommend bleach as a routine part of mold cleanup. A WA DOH fact sheet (2026) says bleach is not effective at removing mold. Moldy drywall usually has to be cut out. Wood can be cleaned with detergent and water, then dried. Never mix bleach with ammonia, because the fumes are toxic (EPA).
Is mold removal safe with a baby or pregnancy in the house?
Keep babies, pregnant people and anyone with asthma away from the work area. Good containment and negative pressure keep dust and spores inside the sealed area. Ask the company how it will seal the work area and whether staying elsewhere during removal makes sense. If anyone has health concerns, talk to a doctor before work starts (EPA).
I cut out wet drywall and found mold on the studs. Who do I call?
A restoration company that does mold remediation. Moldy studs usually can be cleaned and dried rather than replaced. The EPA advises waiting to run fans until the visible mold has been cleaned. Call (360) 555-0123 and ask whether the company handles mold.
Does a musty basement smell mean I need mold remediation?
Not on its own. A musty basement smell means something is damp, and mold may be growing where you can't see it. First find the moisture with a moisture meter, or have a professional check. Then decide whether there's mold to remove. See mold after water damage.
Was mold a problem after the 2021 Whatcom County flood?
Yes. By June 2022, about 5% to 10% of homes hit by the November 2021 flood had dangerous mold growth. That figure was an estimate from the lead disaster case manager at Whatcom Long Term Recovery Group (The Bellingham Herald, June 2022). The same report said local mold companies had long waitlists. See Whatcom County flood recovery.
Can mold come back after remediation?
Yes, if the moisture problem isn't fixed. Mold needs water to grow. Keep indoor humidity in check and fix leaks fast. WA DOH suggests keeping indoor humidity between 40% and 60%.
What about sewage and mold together?
Sewage and mold often show up together after a backup. Sewage is the most contaminated kind of water, and the materials it soaked usually have to be removed. See sewage cleanup.