A frozen pipe burst. What do I do right now?
Work through these steps in order. The first two keep you safe; the rest limit the damage.
- Shut off the main water valve. It's usually where the water line enters the house, often in the crawl space, basement or garage. Close it even if the leak seems small.
- Stay clear of wet electrical. Don't touch outlets, cords or the panel if they're wet or in water (see the next section).
- Open the faucets to drain the lines. With the main off, open the cold and hot taps. That empties the water left in the pipes and takes pressure off the leak.
- Photograph everything before you move it. Shoot the wet ceiling, walls and floors, then close-ups of the broken pipe.
- Call a plumber. The split section needs to be cut out and replaced. Tape or a clamp is only a stopgap.
- Call a restoration company. The crew removes the water and dries the walls and floors. See emergency water removal.
Should I turn off the electricity after a pipe bursts?
Yes, if water is reaching lights, outlets or the panel, and only if you can reach the panel from a dry floor. If the panel is wet, or you'd be standing in water, leave the room and call an electrician.
Washington requires submerged breakers, fuses, outlets and switches to be replaced, not dried out and reused (WA L&I).
How do I know if a pipe is frozen, and how do I thaw it safely?
A pipe is probably frozen if a faucet gives no water or only a trickle on a cold morning. Check every faucet in the house. If one pipe froze, others in the same cold area may be frozen too.
To thaw a frozen pipe safely:
- Open the faucet the pipe feeds, so melting water has somewhere to go.
- Use gentle heat. Wrap the frozen section in rags and pour hot water over them until water flows (City of Bellevue Utilities).
- Keep heating until full water pressure returns (American Red Cross).
- Wrap the pipe in dry insulation once it's thawed, so it doesn't refreeze.
- Watch for leaks as it thaws. If you see water, a wet stain or soft drywall nearby, stop and shut off the main valve.
If you can't find the frozen section, or can't reach it, call a plumber.
Can I use a torch or heat gun to thaw a frozen pipe?
No. Never use a torch, a heat gun or any open flame on a frozen pipe. Open flame is a fire risk inside walls, crawl spaces and attics. Bellevue's water utility also warns against electric devices, because of fire and shock risk (City of Bellevue Utilities). Stick to hot rags and patience.
Why do frozen pipes burst somewhere other than where they froze?
Water expands as it freezes. Pressure then builds in the water trapped between the ice and the closed faucet. The pipe usually splits in that section, away from the ice. That's why the leak can start in a wall or ceiling you'd never suspect, and why it often shows up only when the pipe thaws.
A garden hose left on an outside faucet in winter is a common cause. On a frost-free faucet, the hose stops the water from draining out, so it can freeze and split the pipe inside the wall. That leak may not be found until someone uses the faucet in spring.
Do PEX pipes burst when they freeze?
PEX can stretch a little, so it handles a light freeze better than rigid pipe. It can still burst in a hard freeze, and its fittings can fail. Copper pipe and solder joints tend to split and leak fast. CPVC gets brittle in the cold and can crack. Old galvanized steel is often corroded inside, so it can give way under freezing pressure.
Which pipes in a Bellingham home are most likely to freeze?
Outdoor faucets and pipes in unheated attics, garages and crawl spaces are most likely to freeze (City of Bellevue Utilities). In a home built over a crawl space, the supply lines run through cold air all winter. Pipes in outside walls and in sink cabinets on outside walls are also at risk.

In January 2024, South Whatcom Fire Authority closed its Sudden Valley station because of water damage from the cold (Bellingham Herald, via Yahoo News). See Sudden Valley and Lake Whatcom. A leak under the house can run for days unseen; see crawl space water removal.
How often do pipes freeze in Bellingham?
Bellingham's airport averages about 13 nights at or below freezing in each of December and January. It averages about 4 days a year when the high never gets above freezing (NOAA 1991–2020 normals). Those all-day freezes put the most strain on pipes in crawl spaces and attics.
Recent freezes at the airport, from NOAA daily records:
| Freeze | What the airport recorded | Why it mattered |
|---|---|---|
| Late December 2021 | Lows of 7°F on Dec 27 and 6°F on Dec 31 (NOAA) | Several days below freezing in a row |
| December 2022 | Highs of 17°F on Dec 19 and 21, then 54°F with rain on Dec 24 (NOAA) | A fast thaw, when hidden splits start leaking |
| January 2024 | A high of 10°F and a low of 3°F on Jan 12 (NOAA) | The best-documented local burst-pipe week in recent years |
What happened in the January 2024 freeze in Whatcom County?
The January 2024 cold snap damaged hundreds of homes, apartments, businesses and public buildings across Whatcom County. Bellingham Public Works crews and firefighters answered almost 100 frozen-pipe service requests in the first few days (Bellingham Herald, via Yahoo News). More leaks turned up as temperatures rose (Cascadia Daily News).
The City's water lines had no significant breaks in that freeze. Several customers' water meters did fail in the cold (same Cascadia Daily News report).
Why can't I get a water damage company right away after a big freeze?
A hard freeze bursts pipes in hundreds of buildings in the same few days. Plumbers and restorers get booked at once, and drying equipment can run short. Shut off the water, drain the lines and get on a list early.
Bellingham's water year
| Month | Rain (in) | Freeze nights |
|---|---|---|
| Jan | 4.49 | 13.3 |
| Feb | 2.85 | 12.2 |
| Mar | 3.36 | 7.4 |
| Apr | 2.77 | 1.9 |
| May | 2.23 | 0.1 |
| Jun | 1.61 | 0 |
| Jul | 0.88 | 0 |
| Aug | 1.13 | 0 |
| Sep | 2.01 | 0 |
| Oct | 3.85 | 1.9 |
| Nov | 5.2 | 8.6 |
| Dec | 4.33 | 13.2 |
What restoration looks like after a burst pipe
Burst-pipe water is usually clean water (Category 1), so much of the house can often be dried in place. The catch is that water runs along ceiling joists, inside walls and under flooring before it shows.

- Find where the water went. Moisture meters, often paired with a thermal camera, trace water inside ceilings, walls and subfloors.
- Remove the water. Standing water is extracted, and wet carpet pad is usually pulled.
- Open only what has to be opened. Ask to be shown what needs to come out, and why, before drywall, flooring or cabinets are removed. Soaked ceiling drywall and insulation often have to come down.
- Dry walls and floors, not just the room. Air movers and dehumidifiers run. Crews often push warm, dry air into wall cavities, and they may dry hardwood floors with suction mats. See structural drying.
- Treat and monitor. Crews often apply an antimicrobial where needed. Readings are taken until materials match a dry part of the house. Ask how often you'll get updates while drying runs.
- Rebuild. Repairs after drying can usually be handled by the same company; ask when you call.
Clean burst-pipe water can pick up contaminants the longer it sits, especially in a warm house. That's one more reason to start drying the same day.
Do I need a permit to replace a burst pipe in Bellingham?
Sometimes. Stopping or repairing a leak doesn't need a permit. Replacing a concealed pipe inside a wall or floor counts as new work and needs a City plumbing permit (City of Bellingham). In an emergency, the repair can start first. The permit application is due at the Permit Center the next business day. See Bellingham water damage permits.
Water coming through a ceiling or wall? Call (360) 555-0123. Tell us where the pipe is and how long it ran.
What burst pipe damage costs, and what insurance covers
The price depends on how far the water spread and what has to come out. A pipe that sprayed one bathroom costs far less than one that ran overnight through a ceiling. Wet square footage, drywall removal and equipment days drive most of the bill. See water damage restoration cost.

In Washington, homeowners insurance usually covers burst pipes, including frozen pipes, as long as you heat your home properly (WA OIC). Report it to your insurer quickly. A few points often catch people out:
- The pipe itself. Policies generally pay for sudden water damage. Damage from a pipe that failed from age or wear often isn't covered (Travelers).
- Slow leaks. A pipe that dripped for weeks is treated as a maintenance problem, not a sudden loss.
- Water sublimits. Some insurers in Washington have considered optional caps on water damage, for example $10,000 on a $500,000 policy (WA OIC, 2024). Check your policy for one.
See does insurance cover water damage in Washington and insurance claim help.
How to prevent pipes from freezing
Most frozen pipes can be prevented with steady heat and a little prep. These steps come from the City of Bellevue Utilities:

- Disconnect garden hoses and drain the hose and outside faucet.
- Insulate pipes in crawl spaces, garages and attics. Heat tape can help on pipes that freeze even when insulated. Use a UL-listed product (American Red Cross) and follow the maker's directions for your pipe type.
- Keep the heat steady day and night. If you'll be away, set it no lower than 55°F.
- Open kitchen and bathroom cabinet doors on outside walls, so warm air reaches the pipes.
- Let cold water drip from faucets fed by exposed pipes during very cold weather.
Before winter travel, make sure your main shut-off valve turns, and ask someone to check the house daily.
Common questions
Should I turn the heat down at night during a cold snap?
No. Keep the thermostat at the same setting day and night during a freeze. A cooler house at night is when pipes in outside walls are most likely to freeze.
Could a month-long dry-out after a burst pipe cause problems later?
It can. Materials that stay damp for weeks can grow mold, and wood can warp. If drying drags on, ask to see the moisture readings. See mold after water damage.
Should I call a plumber or a restoration company first?
Shut the main valve first. Then call the plumber to fix the pipe and the restoration company to dry the house, often on the same day. See who to call for water damage.