My basement flooded. What do I do first?
Safety first, then the source, then photos.
- Stay out if the power might be on. Don't step into the water if it could reach outlets, cords, appliances or the electrical panel.
- Smell gas? Leave now. Shut the main gas valve only if you can do it safely, open windows, and leave. Call the gas company from outside (CDC).
- Stop the water if you can reach the valve from a dry spot. For a burst pipe or water heater, shut the main water valve. For a sewer backup, stop running water, flushing toilets and using the washer.
- Photograph and film everything before you move it. Get wide shots of the room, the water line on the walls, and close-ups of damaged items.
- Keep children and pets out if the water came up a floor drain or in from outside. That water is contaminated.
- Call your insurer early. After the December 2025 floods, Washington's Insurance Commissioner asked insurers to tell people to photograph, then remove, damaged items so mold doesn't spread (WA OIC).
Is it safe to walk into a flooded basement with the power on?
No. Never turn power on or off, or use an electric tool, while you're standing in water (CDC).
How much water in a basement is too much to go in?
There's no safe depth while the power is on. An inch of water is dangerous if it touches a cord or power strip. If you can't be sure, stay on the stairs.
Who shuts off power if the electrical panel is in the flooded basement?
Call an electrician. Don't walk through water to reach the panel. If you'd have to, the CDC says to have an electrician turn the power off (CDC).
Where did the water come from? It changes the whole job
The source decides how dirty the water is and what can be saved. Crews sort water into three categories under the IICRC S500 standard.

| Source | What you'll see | Water category |
|---|---|---|
| Burst pipe, water heater, washer hose | Water spreading from one spot, often fast | Category 1 (clean) at first. It can turn gray if it sits |
| Rain soaking through walls or floor (groundwater seepage) | Water at the base of walls or along floor cracks after heavy rain; white chalky residue on concrete | Depends on what the water picked up; the crew should tell you which category they set and why |
| Sewer backup | Water coming up a floor drain, toilet or shower, often with a smell | Category 3 (sewage) |
| River or creek floodwater | Water coming in from outside, often with mud | Category 3 |
| Surface runoff from heavy rain | Water coming in under doors or window wells | Depends on what it picked up; the crew should tell you which category they set and why |
Any contact with sewage makes water Category 3, even if it looks clear. See crawl space water removal, water damage categories and sewage cleanup.
Why does water seep through my basement walls when it rains?
Soaked soil presses water against the foundation. This is called hydrostatic pressure. It pushes water through cracks and the joint where the wall meets the floor, most often when storms come back to back.
Should I pump out a flooded basement right away?
It depends on whether the ground outside is still flooded. If the yard is under water, wait until most of the outside water has gone down. Then pump at the same rate the floodwater recedes. Draining too early can push the walls in or heave the floor (WA Department of Health).

If the water came from a burst pipe or water heater and the ground outside is dry, get it out right away.
What can be dried, and what has to come out?
That depends on the water category and how long things stayed wet. A good crew measures first, then explains what's coming out and why. Ask to be shown what needs to come out, and why, before drywall, flooring or cabinets are removed. Sewage and floodwater are the exception, because contaminated material has to come out right away for safety.

Clean water, caught quickly:
- Concrete floors and walls, framing and studs can usually be dried with air movers and dehumidifiers.
- Drywall can often be dried in place if water didn't get into the insulation behind it.
- Carpet can sometimes be saved. The pad under it is usually pulled, because it holds water like a sponge.
Sewage or river and creek floodwater:
- Carpet, pad, drywall and insulation the water touched have to be removed and thrown away.
- A shop vac and bleach don't make those materials safe. The contamination soaks into them.
- Concrete, studs and other hard surfaces get cleaned, disinfected and then dried.
- Mud from a river or creek flood is shoveled and hosed out first. Crews call this a mud-out.
See structural drying for how drying is measured.
What is a flood cut?
A flood cut is a straight cut along the drywall, above the highest point the water wicked. The wet strip and the insulation behind it come out. That opens the wall so the studs can dry. The crew should use moisture readings to set the height and show you those readings.
After 5 inches of flooding, do I have to replace all the drywall? Can it be dried instead?
Usually only the bottom of the wall comes out, not the whole sheet. Drywall wicks water upward, so the cut goes just above the wet line. With clean water, a fast start and dry insulation, the wall may not need cutting at all. After sewage or floodwater, the wet drywall and insulation come out. Walls closed up while still wet can grow mold out of sight.
Older basements: asbestos comes first
In ZIP 98225, 57% of homes were built before 1980 (US Census ACS 2020–2024). In Whatcom County, Northwest Clean Air Agency rules require checking for asbestos before renovation or demolition, usually with a survey by a certified inspector.
Water still in the basement after heavy rain? Call (360) 555-0123 to be connected with a local restoration company. Say how deep the water is and whether the yard is still flooded, so the crew can time the pumping to protect the walls.
Is my house worth saving after the basement flooded up to the furnace and electrical?
Usually, yes. Concrete walls and framing can usually be cleaned, disinfected and dried. In Washington, breakers, fuses, outlets and switches that were underwater must be replaced. Furnaces, water heaters, wiring and panels must be replaced or reconditioned by the manufacturer (WA L&I).

An electrical inspection is required if any part of the electrical system was flooded. In the City of Bellingham, electrical permits come from the City. Outside city limits, such as Sudden Valley, they come from L&I.
Why Bellingham basements flood when they do
Whatcom County's flood season runs October through February, and that's when heavy rain pushes water into basements here (Whatcom County).

- November 2021. Back-to-back atmospheric rivers dropped 14.57 inches at Bellingham's airport, nearly three times the November normal. The Nooksack flooded towns across north Whatcom County.
- December 2025. The airport recorded 8.05 inches, almost double the December normal. About 10 houses in the Lettered Streets flooded with sewage and stormwater (Cascadia Daily News). In Nooksack, damage ranged from wet crawl spaces to 10 to 20 inches inside some homes (Cascadia Daily News).
In Bellingham, the sewer line from your house to the city main belongs to you, including the connection to the main (City of Bellingham). A backup caused by that line is yours to repair. See Lettered Streets and Downtown, Everson, Nooksack and Sumas and the Whatcom County flood recovery guide.
Does insurance cover a flooded basement?
It depends on where the water came from. Check your policy before work starts.

- Burst pipe or failed water heater. Sudden leaks are usually covered if you report them quickly. Frozen pipes are usually covered as long as you heated the home properly (WA OIC).
- Groundwater seeping in. Usually not covered. Insurers treat it as a maintenance problem, like a leaking foundation (WA OIC).
- Sewer backup or sump pump overflow. Usually covered only if you bought that endorsement (WA OIC homeowner guide).
- River, creek or surface flooding. A standard homeowners policy doesn't cover flood. That needs a separate flood policy, which generally has a 30-day waiting period (FEMA).
- Mold. Coverage is usually limited, and only applies when the mold came from a covered loss (WA OIC).
Federal flood insurance covers less in a basement than people expect. It covers items like furnaces, water heaters, sump pumps, electrical boxes and unfinished, untaped drywall. It excludes finished walls, finished flooring and most personal belongings (FEMA). See does insurance cover water damage in Washington and insurance claim help.
Sump pumps, backwater valves and waterproofing
Restoration companies clean up and dry flooded basements. Waterproofing, foundation repair and drainage are separate trades. If rain keeps coming through the walls, call a waterproofing or drainage contractor once the basement is dry.
If a sump pump failed, have a plumber check it. If sewage keeps coming up a floor drain, ask a licensed plumber whether a backwater valve suits your side sewer. Fix the cause before walls and flooring go back in, or the next storm repeats the job.
Common questions
How long does a flooded basement take to dry, and what do I do with damaged belongings?
There's no fixed number of days. It depends on how much got wet, the materials and the weather. Drying is done when readings match the same material in a dry area. Photograph belongings before you throw anything out, because your insurer may want proof. If rooms need to be emptied, ask about moving and storing belongings. See structural drying.
How do I dry basement carpet after shop-vacuuming the water?
If the water was clean and the carpet was wet for less than a day or two, pull it back and remove the soaked pad. Then run fans and a dehumidifier. If the water came up a drain or in from outside, the carpet and pad have to go.
How do I remove water from a basement myself?
For a small amount of clean water, use a wet-dry vacuum or a water transfer pump. Only do this once an electrician says the power is safe (CDC). For sewage, floodwater or more than a few inches, call a restoration company.
What if a neighbor's water line or a city water main break floods my basement?
Photograph the damage, tell the neighbor or the City in writing, and call your own insurer. Who pays depends on the facts and your policy.
Who do I call when basement carpet is wet but I can't find the source?
Call a restoration company that uses moisture meters and a thermal camera to trace the water. If it turns out to be a leaking pipe, you'll also need a plumber. See who to call for water damage.
How much does flooded basement cleanup cost?
National figures put most flooded basement cleanups at about $2,000 to $7,000 (Angi, 2026 national data). We found no reliable Bellingham average. The price depends mostly on the water category, the square footage and how much has to come out. Ask for a written estimate before any non-emergency work starts. See water damage restoration cost.